INA LFR50/8-6-2RS-RB INALFR50/8-6-2RS-RB

INA Track Roller, Gothic Arch Groove Yoke Type, Series: LFR, 8 mm Bore, 24 mm Roller Diameter, 11 mm Roller Width, 11 mm Overall Width, 4100 N Load, Double Seal Closure, Steel Roller

• Track rollers LFR are double row angular contact ball bearings comprising an outer ring with a gothic arch profile, an inner ring and two ball and cage assemblies with plastic cages
• The inner ring and outer ring are made from rolling bearing steel 100Cr6
• The special outer ring gives two point contact in the contact zone with the raceway
• The contact angle is a maximum of 30 deg
• The bearings can support axial forces from both directions as well as radial forces
• Contact seal on both sides
• The inner ring and outer ring are made from corrosion-resistant steel
• The rolling elements are protected against corrosion by the grease
• Locating bearing track roller
• 4100 N dynamic/2300 N static

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/INA_LFR50862RSRB_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/INA_LFR50862RSRB_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/INA_NIPA1_Warranty.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/INA_NIPA1_Warranty.pdf