Fafnir® 1010KLL TIM1010KLL

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. When set screws are used, Timken® suggests using shaftguarding Technology™, a stainless-steel, hardened band that is inserted in a groove on the inner ring. When the set screws are tightened, they press against the band, tightening the grip on the shaft. Unlike traditional set screws, which can dig into the shaft, there are no nicks, raised metal or permanent shaft damage. The stainless band resists the formation of corrosion on the shaft.

Timken® Fafnir®, 1010KLL, Ball Insert Bearing Housed Unit, Standard Duty, Series: KLL, 5/8 in Bore, 1.5748 in OD, 1 Rows, 1-3/32 in Width, Double Seal Closure, 2380 lb Dynamic/1070 lb Static Load, Steel Bearing, Rubber Seal, 10530 rpm Maximum, -50 to 120 deg C, Uncoated

• These eccentric wide-inner-ring ball bearings have either one or two mechanical-seals
• These bearings are suitable for higher-speed and/or higher temperature applications
• They incorporate non-contact seals, these bearings have very low rotational torque
• KLL type are pre-lubricated at the factory and require no further lubrication
• KLL series bearings have cylindrical outside diameters

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_1103KRR3_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_1103KRR3_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_1103KRR3_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_1103KRR3_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_1010KLL_Specification_Sheet.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_1010KLL_Specification_Sheet.pdf