Contact 812-425-1336

Dodge® 049690 DOD049690
  1. pin-int

Dodge® 049690 DOD049690

Dodge® 049690 206 Normal Duty Pillow Block Ball Bearing Unit, 1-1/8 in Dia Bore, 4-1/4 to 5 in L Bolt Center-to-Center, 1.69 in Base to Bore Centerline, 6-1/4 in OAL x 3.31 in OAH

  • Manufacturer: Dodge Industrial
  • Brand Name: Dodge®
  • Part Number: DOD049690
  • Alt Part Number: P2B-SCUAH-102
  • MPN: 049690
  • UPC: 782475319725
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at EVANSVILLE, IN
  • loading Check Availability at All Branches

A setscrew shaft attachment method is the most common means of securing a mounted ball bearing to a shaft and also the easiest to install. The Dodge® mounted ball bearing offering is engineered with a 65 deg setscrew angle. This ensures the maximum grip onto the shaft, especially when using premium cup point set screws with the high quality manufacturing of the Dodge® insert.

Dodge® Pillow Block Ball Bearing Unit, Normal Duty, Series: 206, 1-1/8 in Bore, 4-1/4 to 5 in Bolt Center-to-Center Length, 1.69 in Base to Bore Centerline, 6-1/4 in Overall Length, 1.52 in Overall Width, 3.31 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1-3/4 in Base Width, 65 deg Set Screw Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 4368 lb Dynamic/2538 lb Static Load, 6500 rpm Maximum, Cast Iron, Powder Coated

Base Width      :      1-3/4 in
Base to Bore Centerline      :      1.69 in
Bolt Center-to-Center Length      :      4-1/4 to 5 in
Bore Diameter      :      1-1/8 in
Bore Type      :      Round
Expansion Type      :      Non-Expansion (Fixed)
Finish      :      Powder Coated
Load Capacity      :      4368 lb Dynamic/2538 lb Static
Locking Device      :      65 deg Set Screw
Material      :      Cast Iron
Maximum Speed      :      6500 rpm
Mounting Type      :      Two-Bolt Base
Overall Height      :      3.31 in
Overall Length      :      6-1/4 in
Overall Width      :      1.52 in
Seal Type      :      Single Lip
Series      :      206
Type      :      Normal Duty
  • 65 deg setscrew locking system
  • Precision hardened and honed inner and outer rings
  • Grade 10 balls
  • Wide inner ring design
  • Higher back pillow block